0
0

Arisaka Offset Scout Mount Picatinny – 45 Degree Weapon Light Mount

UPC: 601557939715

$55.00

11 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Arisaka Offset Scout Mount solves a problem every scout light owner runs into: the factory Picatinny clamp sticks the light way out where it snags on gear, blocks your hand, and adds clunky bulk. This mount replaces that stock adapter with a slim, patented design that pulls the light in close and kicks it out to a 45-degree angle, so it clears your support hand and stays out of the way of top-rail optics and front sights.

What the Arisaka Offset Scout Mount Fits

Compatibility is where this thing shines. It's built for the SureFire Scout Light M600 and M300 series, the Modlite PLH, PLHv2, and OKW, the Arisaka 300, 600, and 18650 Series bodies, and the Streamlight ProTac Rail Mount 1, 2, and HL-X (non-laser). It also plays nice with the Cloud Defensive REIN. If you run a light on a scout-style platform, odds are good this mount takes it. You can orient the light upward to sit at roughly the 1:30 or 10:30 clock position, or flip it down to land around 4:30 or 6:30, so you dial in exactly where your thumb wants the switch.

Built Tough, Built Light

Arisaka machines this mount from 6061 aluminum and finishes it with a MIL-A-8625 Type III hard-coat anodize, the same durable coating you'd expect on quality rifle parts. It comes in at under 0.20 inch thick, which is about as low-profile as a scout mount gets. Folks who've run these tend to notice the minimal footprint on the rail, the negligible weight, and the smooth non-reflective finish that doesn't throw glare.

Getting the Arisaka Mount Dialed In

Installation is straightforward if you've got the right bits. The mount clamps to Picatinny with a single cap-head screw, and the light body attaches with two flat-head screws, all Torx drive. Arisaka calls for 30 inch-pounds on the clamping screw and 20 inch-pounds on the light body screws, with a dab of medium-strength threadlocker to keep everything put through recoil. It's made in the USA and covered under Arisaka's patents.

Key Specifications

  • Manufacturer: Arisaka Defense
  • Manufacturer Part Number: OSM-P
  • UPC: 601557939715
  • Product Type: Offset Weapon Light Mount
  • Rail Interface: Picatinny
  • Offset Angle: 45 Degrees
  • Material: 6061 Aluminum
  • Finish: MIL-A-8625 Type III Hard-Coat Anodized
  • Color: Black
  • Thickness: Under 0.20 in
  • Light Orientation: Upward (1:30/10:30) or Downward (4:30/6:30)
  • Hardware: One 10-32×1.25 in Torx cap head screw, two 8-32×5/16 in Torx flat head screws
  • Tools Required: T27/IP27 and T20/IP20 Torx driver; T9 Torx to remove stock SureFire mount
  • Origin: Made in USA

What’s Included

  • Arisaka Offset Scout Mount (Picatinny)
  • One 10-32×1.25 in Torx cap head clamping screw
  • Two 8-32×5/16 in Torx flat head light body screws

Frequently Asked Questions

Will the Arisaka Offset Scout Mount work with my SureFire M600 or Modlite light?

Yes. It's designed for the SureFire Scout Light M600 and M300 series, the Modlite PLH, PLHv2, and OKW, along with Arisaka 300, 600, and 18650 bodies and the Streamlight ProTac Rail Mount 1, 2, and HL-X (non-laser). Basically any light running a scout-style mounting interface is a strong candidate.

What tools do I need to install the Offset Scout Mount on a Picatinny rail?

You'll want a T20 or IP20 Torx driver for the mount hardware and a T27 or IP27 for the light body, plus a T9 Torx to pull the stock adapter off a SureFire Scout Light. Arisaka recommends 30 inch-pounds on the clamping screw and 20 inch-pounds on the light body screws with a medium-strength threadlocker so nothing backs out under recoil. The drivers aren't included in the box.

Can I mount the light pointing up or down with this mount?

You can run it either way. Oriented upward, the light sits at roughly the 1:30 or 10:30 clock position, and flipped downward it lands around 4:30 or 6:30. That flexibility lets you place the tailcap switch right where your thumb naturally reaches.

How low-profile is the Arisaka Offset Scout Mount really?

It comes in at under 0.20 inch thick, which pulls the light in tight against the handguard instead of leaving it hanging off a bulky rail clamp. Users consistently point out the small footprint and light weight, along with a smooth non-reflective anodized finish that keeps glare down.

Additional information

UPC

601557939715

Manufacturer

Manufacturer Part Number

OSM-P

Product Type

Mount

Color

Black

Style

Mount

Reviews

There are no reviews yet.

Be the first to review “Arisaka Offset Scout Mount Picatinny – 45 Degree Weapon Light Mount”