Description
Suppressor owners have been asking SureFire for this one for a while. The Fast-Attach HUB adapter takes any suppressor with a standard 1.375×24 HUB mounting interface and converts it to SureFire's SOCOM quick-detach system. If you already have SOCOM muzzle devices sitting on your rifles, this little piece of stainless steel lets you bring just about any modern HUB-pattern can into that ecosystem without buying a dedicated SureFire suppressor.
How the Fast-Attach HUB Adapter Works
The adapter threads into the back of your HUB suppressor, and from there it behaves exactly like the rear section of a SOCOM can. Slide it over the muzzle device, index it on the built-in slot, and snug down the lock ring at the base. On and off takes seconds, no tools needed at the muzzle, and the lockup is repeatable enough to keep point of impact shift to a minimum between mounting sessions. SureFire machines it to the same dimensions and tolerances as the back section of their combat-proven suppressors, and it's the only HUB mount out there that genuinely replicates that SOCOM suppressor-to-adapter interface. One note worth knowing before you order: SureFire specifies their Z-72636 spanner tool for properly torquing the adapter into your HUB suppressor, so plan on picking one up if you don't have it already.
Built Like the Rest of the SOCOM Line
This is heat-treated 17-4 stainless steel with a black nitride and DLC coating, made in the USA, and it shrugs off heat, carbon, and corrosion the way you'd expect from SureFire. At 2 inches long and 5.3 ounces, it adds a bit of length and weight to your can, which is a fair trade for genuine QD capability. The 7.62 version is the more versatile pick of the two sizes, since it works across a wider range of SureFire SOCOM muzzle devices, making it a smart choice if you're running mixed calibers. Pair it with a quality HUB suppressor and you get fast swaps between rifles that already wear SOCOM flash hiders or brakes.
Key Specifications
- Manufacturer: SureFire
- Manufacturer Part Number: HUB-FA-762-BK
- UPC: 084871333955
- Model: Fast-Attach HUB Suppressor Muzzle Adapter
- Product Type: HUB to SOCOM QD Adapter
- Thread Pattern: 1.375×24 (1 3/8-24) HUB
- Caliber Rating: .308 / 7.62 NATO
- Construction: Heat-treated 17-4 stainless steel
- Finish: Black nitride / DLC
- Length: 2.0 in (5.1 cm)
- Weight: 5.3 oz (150 g)
- Color: Black
- Made In: USA
What’s Included
- SureFire Fast-Attach HUB 7.62 adapter (Z-72636 spanner tool and suppressor sold separately)
Frequently Asked Questions
Will the SureFire Fast-Attach HUB adapter work with my suppressor?
If your suppressor uses the industry-standard 1.375×24 HUB mounting interface, this adapter will thread right in. That covers a huge range of modern cans from brands that build on the HUB pattern. Just make sure the bore of your suppressor is appropriate for the caliber you're shooting.
Do I need any special tools to install the Fast-Attach HUB?
SureFire calls for their Z-72636 spanner tool to properly torque the adapter into your HUB suppressor, and it's sold separately, so plan on grabbing one. Once the adapter is installed in the can, though, attaching and removing the suppressor from your SOCOM muzzle device is completely tool-free.
What's the difference between the 7.62 and 5.56 versions of this adapter?
The 7.62 version is the more flexible of the two since it fits a wider variety of SureFire SOCOM Fast-Attach muzzle devices, while the 5.56 version only works with 5.56 SOCOM mounts. If you run rifles in multiple calibers with SOCOM devices, the 7.62 adapter is usually the smarter buy.
Does the Fast-Attach HUB adapter hold zero when I remove and reattach my can?
It's machined to the same dimensions and tolerances as the back section of SureFire's own SOCOM suppressors, so the lockup is consistent and repeatable. Users report minimal point of impact shift between mounting cycles, which is one of the main reasons to run the SOCOM interface in the first place.







Reviews
There are no reviews yet.