Description
The SureFire M640V Scout Light Pro IR takes the combat-proven Scout Light platform and adds a genuinely useful trick: dual-spectrum output in a single head. Twist the bezel one way and you get 350 lumens of bright white light for target ID and everyday work. Twist it the other way and you're in 120mW of 860nm infrared for use behind night vision, with no IR filter to fumble with in the dark. That on-the-fly switching is the whole point of the Vampire family, and the M640V does it cleanly.
What Sets the M640V Scout Light Pro IR Apart
The headline upgrade over older Scout Lights is the new Low-Profile Mount, or LPM. Instead of being locked into one position, this mount lets you dial the light's orientation on the rail so it sits where you want it, whether that's tucked in tight against the handguard to avoid snagging or rotated over to make room for a laser aiming module. It clamps securely to any MIL-STD-1913 Picatinny rail, and an M-LOK mount comes in the box so you can go direct-attach on a modern handguard without buying anything extra.
Beam, Build, and Battery Life
Both beams run through SureFire's proprietary TIR lens, which shapes a far-reaching, high-intensity center with plenty of soft surround light. That combination works well from close quarters out to medium and longer ranges. The white output runs about 2.5 hours on a set of batteries, while the IR side stretches way out to roughly 16.75 hours, and it runs on two included CR123A lithium cells. The body is aerospace aluminum with a mil-spec hard-anodized finish, tempered glass, and O-ring seals, so it shrugs off recoil, weather, and general field abuse. It's made in the USA and covered by SureFire's warranty.
Running the M640V in the Field
Activation is dead simple thanks to the shrouded Z68 push-button tailcap, giving you both momentary and constant-on with a design that helps prevent bumping it on by accident. The tailcap can also be swapped for other SureFire Scout tailcaps if you'd rather run a remote pressure pad down the road. At 5.5 inches long and just over four ounces, it stays out of the way on a carbine while giving you real dual-spectrum capability.
Key Specifications
- Manufacturer: SureFire
- Manufacturer Part Number: M640V-BK-PRO
- Model: M640V Scout Light Pro IR
- UPC: 084871329309
- White Light Output: 350 lumens
- Infrared Output: 120mW
- IR Wavelength: 860nm
- Peak Beam Intensity: 11,500 candela
- Battery: Two CR123A lithium (included)
- Runtime: 2.5 hrs white / 16.75 hrs IR
- Mount Type: Picatinny (installed) / M-LOK (included)
- Tailcap: Z68 momentary/constant-on
- Length: 5.50 in
- Head Diameter: 1.06 in
- Body Material: Mil-Spec hard-anodized aluminum
- Color: Black
What’s Included
- SureFire M640V Scout Light Pro IR weapon light
- Picatinny rail mount (installed)
- M-LOK mount
- Z68 momentary/constant-on tailcap
- Two CR123A lithium batteries
- User manual
Frequently Asked Questions
How do you switch the M640V between white light and IR?
You rotate the bezel at the front of the head to toggle between the white LED and the infrared LED. There's no separate filter to attach or remove, so the change happens right on the gun in seconds. This keeps things simple when you're moving between white-light tasks and running behind night vision.
Does the M640V Scout Light Pro come with an M-LOK mount, or just Picatinny?
It ships with the Picatinny mount already installed plus a separate M-LOK mount in the box. That means you can run it on a 1913 rail out of the gate or swap to direct M-LOK attachment on a modern handguard without buying extra hardware. The new Low-Profile Mount also lets you rotate the light's position for better clearance around lasers and other accessories.
What batteries does the SureFire M640V use and how long do they last?
It runs on two CR123A lithium batteries, and SureFire includes them so you can mount it and go. White light output lasts around 2.5 hours, while the infrared side stretches to roughly 16.75 hours per set. Keeping a few spare CR123A cells in your kit is always a smart move for a serious use light.
Can I add a remote pressure switch to the M640V?
Yes. The Z68 tailcap can be removed and replaced with other SureFire Scout-series tailcaps, including ones set up for remote pressure pads. That gives you room to grow the setup if you decide you want tape-switch activation later.





Reviews
There are no reviews yet.