Description
Built specifically for long guns, the Streamlight ProTac Rail Mount 2 is a low-profile weapon light that punches well above its size. The single C4 LED cranks out 625 lumens on high with 22,000 candela behind it, pushing a usable beam out to 297 meters. That kind of reach and throw makes it a solid pick for home defense rifles, patrol carbines, or any setup where you need to positively identify what you're pointing at before you do anything about it. On the low end it drops to 60 lumens with an 18-hour runtime, so you've got range from close-quarters work to stretched-out target ID.
What Makes the ProTac Rail Mount 2 Tick
The body is machined 6000-series aircraft aluminum with a hardcoat anodized finish and an impact-resistant tempered glass lens, so it shrugs off recoil and rough handling. It's rated IPX7 waterproof, meaning it can take a dunk down to a meter for half an hour without missing a beat. The whole package stays compact at around 5 inches and about 5 ounces on the light itself, which keeps your rifle balanced instead of nose-heavy.
Switching and Mounting on the RM2
The integrated rail clamp locks directly onto MIL-STD-1913 (Picatinny) rails with a thumbscrew, so mounting doesn't require putting your hand anywhere near the muzzle. You get two ways to run it: the push-button tail cap for quick manual activation, or the included remote pressure switch for momentary and constant-on control right at your support hand. An M-LOK mount comes in the box too, giving you flexibility across different handguards.
Programming the ProTac Rail Mount 2
Streamlight's TEN-TAP programming lets you set the light up how you actually run it. You get three user-selectable programs: high/strobe, high only, or low/high. If you never want to accidentally hit strobe, lock it out. If you want the strobe for signaling or disorienting, it's there. Power comes from two CR123A lithium batteries, which are included so you can zero it in and get shooting the same day.
Key Specifications
- Manufacturer: Streamlight
- Model: ProTac Rail Mount 2
- Manufacturer Part Number: 88059
- UPC: 080926880597
- High Output: 625 lumens / 22,000 candela / 297m beam / 2 hr runtime
- Low Output: 60 lumens / 2,000 candela / 89m beam / 18 hr runtime
- LED: C4 LED
- Battery: Two (2) CR123A lithium (included)
- Programming: TEN-TAP, 3 user-selectable modes
- Mounting: MIL-STD-1913 Picatinny clamp, M-LOK mount included
- Housing: Machined aircraft aluminum, hardcoat anodized
- Lens: Impact-resistant tempered glass
- Waterproof Rating: IPX7 (1m for 30 min)
- Length: Approx. 5 in
- Color: Black
What’s Included
- ProTac Rail Mount 2 weapon light
- Integrated Picatinny rail mount
- Remote pressure switch
- Push-button tail cap switch
- Remote retaining clips
- Double-sided tape
- Zip ties
- M-LOK mount
- Two (2) CR123A lithium batteries
- User manual
Frequently Asked Questions
Does the ProTac Rail Mount 2 come with the pressure switch and batteries?
Yes. It ships with both a remote pressure switch for momentary and constant-on control and a standard push-button tail cap, so you can choose how you want to run it. Two CR123A lithium batteries are also included, meaning you can mount it and be ready to go the same day.
Will the ProTac Rail Mount 2 fit both Picatinny and M-LOK handguards?
It has an integrated clamp that attaches directly to MIL-STD-1913 (Picatinny) rails using a thumbscrew. An M-LOK mount is included in the box as well, so you're covered whether your handguard is Pic rail or M-LOK compatible.
How bright is the RM2 and how far does the beam reach?
On high it puts out 625 lumens backed by 22,000 candela, throwing a usable beam out to 297 meters. That's plenty of reach and intensity for target identification in the dark. The low setting drops to 60 lumens for close-range work and stretches battery life out to about 18 hours.
What is TEN-TAP programming on the ProTac Rail Mount 2?
TEN-TAP lets you pick from three preset operating programs to match how you use the light. Your options are high/strobe, high only, or low/high, so you can lock out the strobe if you don't want it or keep it available for signaling. It's an easy way to tailor the light to your specific setup without any extra tools.







Reviews
There are no reviews yet.