Description
The TLR-6 HL packs a surprising amount of punch into a housing you'll barely notice on your pistol. It pairs a high-output white LED pushing 300 lumens with an integrated red aiming laser, giving you both target identification and a quick aiming reference in one low-profile unit. This is the 69343 model, built for railed Glock pistols, and it clamps onto both the accessory rail and trigger guard area for a rock-solid hold that stays put through recoil.
What Sets the TLR-6 HL Apart
Ambidextrous push-button switches sit on both sides of the light, so lefties and righties get the same easy access. The three-position selector lets you run LED only, laser only, or both together, depending on what the situation calls for. At 4,250 candela with a beam that reaches out to around 130 meters, this little light throws farther than you'd expect from something this size, making it plenty capable for room-clearing or checking down a hallway. The polymer housing is impact-resistant and tested to survive a one-meter drop, which is the kind of abuse a carry light needs to shrug off.
Battery Life and Charging on the TLR-6 HL
Streamlight went rechargeable here with their proprietary SL-B2 lithium battery. You get 20 minutes of runtime in LED or LED/laser combo mode per cell, and since it ships with three batteries, that adds up to roughly an hour of light and laser use before you need to swap. Running the red laser alone stretches that to about 9 hours. The included two-bay charge case with a USB-C cord tops off your spares off the gun, so there's no tethering your pistol to an outlet.
Fitment for Your Glock
This version covers a wide spread of railed Glock models, including Gen 3, 4, and 5 pistols like the G17, G19, G20, G21, G22, G23, G29, G30, and G31. The battery swaps out with the light still mounted, and thanks to the windage and elevation screws seated in bushings, your laser holds zero even after a battery change. If you plan to carry, pair it with a holster that fully covers the trigger guard.
Key Specifications
- Manufacturer: Streamlight
- Model: TLR-6 HL
- Manufacturer Part Number: 69343
- UPC: 080926693432
- Light Output: 300 lumens
- Peak Beam Intensity: 4,250 candela
- Beam Distance: 130 meters
- Laser: Red aiming laser (640-660nm)
- Runtime (LED or LED/Laser): 20 minutes per battery
- Runtime (Laser Only): 9 hours
- Battery: Streamlight SL-B2 rechargeable lithium
- Modes: LED only, laser only, LED/laser combo
- Switch: Ambidextrous push-button
- Housing: Impact-resistant polymer, 1-meter tested
- Fitment: Railed Glock models (Gen 3/4/5)
- Color: Black
What’s Included
- TLR-6 HL weapon light with red laser
- Three (3) Streamlight SL-B2 rechargeable batteries
- Two-bay charge case
- USB-C charging cord
- Mounting hardware/keys
- Instructions
Frequently Asked Questions
Which handguns does the TLR-6 HL 69343 fit?
This model is made for railed Glock pistols across Gen 3, 4, and 5. That covers popular options like the G17, G19, G20, G21, G22, G23, G29, G30, and G31. It attaches to the accessory rail and trigger guard, so it's specific to railed frames rather than the subcompact non-rail Glocks.
How long does the TLR-6 HL run on a charge?
Each SL-B2 battery gives you about 20 minutes of runtime in LED or combined LED/laser mode. Since the light ships with three batteries, you get roughly an hour of light and laser use total before recharging. Running the red laser by itself stretches that out to around 9 hours.
Do I have to re-sight the laser after changing the battery?
No. You can swap the battery with the light still mounted on your pistol, and the laser holds its zero. The windage and elevation screws sit in bushings that keep your setting locked in through battery changes.
Will my current holster work with the TLR-6 HL installed?
Not always. Adding a light and laser changes the profile of your pistol, so you'll typically want a holster cut specifically for a TLR-6 equipped gun. Streamlight recommends a holster that fully covers the trigger guard for safe carry.



Reviews
There are no reviews yet.