Description
The Streamlight TLR-2 G pairs a serious white light with a green aiming laser in a single rail-mounted unit, so you're not stacking two separate accessories on your handgun or long gun. The C4 LED puts out 300 lumens and 12,000 candela through a textured parabolic reflector, giving you a concentrated beam with plenty of spill to light up a room or a backyard. The integrated 510-530nm green laser is the real draw here since green reads far brighter to the human eye than red, staying visible where a red dot tends to wash out in daylight.
What Sets the TLR-2 G Apart
The three-position mode switch lets you run laser only, light only, or both together, and it works ambidextrously so lefties and righties are covered. A quick double-tap of the paddle kicks on the strobe, and if you'd rather skip it, the strobe is user-programmable and can be turned off. Windage and elevation screws sit in bushings for dependable zero retention, and owners consistently report the laser holds point of aim through recoil and repeated mounting.
Built to Take a Beating
The body is 6000 series machined aircraft aluminum with a black anodized finish, topped with a shock-mounted Borofloat glass lens and a chemical-resistant polymer laser housing. It carries an IPX4 water-resistant rating and weighs in around 4.7 ounces with batteries. Two CR123A lithium cells run the light and laser together for about 2.5 hours, or 17 hours in laser-only mode, and those cells hold a 10-year shelf life so it's ready when you grab it.
Mounting the TLR-2 G to Your Gun
The rail grip clamp snaps on and locks down with no tools and without putting your hands near the muzzle. It fits Glock-style and Picatinny rails right out of the box, and the included locating keys cover Beretta 90two, Smith & Wesson SW99 and TSW, and SIG SAUER P320 rails too. It's on the larger side, so it's best suited to full-size duty and home-defense pistols or a long gun rather than everyday concealed carry.
Key Specifications
- Manufacturer: Streamlight
- Model: TLR-2 G
- Manufacturer Part Number: 69250
- UPC: 080926692503
- Light Output: 300 lumens
- Peak Beam Intensity: 12,000 candela
- Beam Distance: 245 meters
- Laser: 510-530nm green aiming laser
- Light Source: C4 LED, 50,000-hour lifetime
- Runtime: 2.5 hrs light/laser; 17 hrs laser only
- Battery: Two CR123A lithium (included)
- Housing: 6000 series aircraft aluminum, black anodized
- Water Resistance: IPX4
- Weight: 4.72 oz with batteries
- Dimensions: 3.39 x 1.47 x 1.83 in
- Color: Black Anodized
What’s Included
- TLR-2 G weapon light with integrated green laser
- Two CR123A lithium batteries
- Rail locating keys for Glock-style, Picatinny (MIL-STD-1913), Beretta 90two, Smith & Wesson SW99 and TSW, and SIG SAUER P320 rails
- Allen wrench for key installation
- User manual
Frequently Asked Questions
Will the green laser on the TLR-2 G actually show up in daylight?
Yes, and that's the whole point of the green laser over a red one. Green wavelengths read much brighter to the human eye, so the dot stays visible in bright outdoor light where a red laser often washes out. It's not a magic bullet against direct blinding sun on a reflective target, but for the vast majority of daytime and low-light situations it's easy to pick up.
What rails and firearms does the TLR-2 G fit?
It mounts directly to Glock-style and Picatinny (MIL-STD-1913) rails right out of the box, which covers most modern handguns and long guns. The included locating keys also fit Beretta 90two, Smith & Wesson SW99 and TSW, and SIG SAUER P320 rails. Fitting the rail and fitting a holster are two separate things, so plan on picking up a holster made for a light-bearing setup.
Does the TLR-2 G hold zero after you take it off and put it back on?
It's built for it. The windage and elevation screws sit in bushings for dependable zero retention, and the rail clamp is designed for repeatable mounting. Owners who run it hard report the laser stays on point through recoil and repeated remounting, though it's smart to confirm zero after any time you pull it off.
How do I turn off the strobe on the TLR-2 G?
The strobe is user-programmable, so you can disable it if you don't want it. A quick double-tap of the momentary paddle fires the strobe by default, and the programming sequence lets you shut that feature off entirely and turn it back on later. Steady white light, laser only, or both together are all still available through the three-position mode switch.





Reviews
There are no reviews yet.