$46.99
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Every gun owner who has tried to drift out a stubborn pin with the wrong tool knows how fast a screwdriver or the back of a wrench can wreck a finish. The Weaver Gunsmithing Hammer & Punch Set takes that guesswork off the table by giving you a matched hammer and punch lineup built for controlled, careful work at the bench.
The kit runs eight steel punches sized to cover the pin diameters you run into most, from tiny roll pins up through larger drift work. You get 1/16 short and long, 3/32 short and long, 1/8 long, 5/32 long, 3/16 long, a 1/8 center punch, and a brass punch that is a favorite for drifting dovetail sights without leaving marks. That spread handles the majority of pin removal and installation jobs on modern pistols, rifles, and shotguns.
The hammer is the standout piece here. It carries two swappable faces, one brass and one plastic, so you can pick your strike based on how delicate the part is. Brass gives you a firmer, softer-than-steel tap for driving pins, while the plastic face is there for gentle persuasion on finished surfaces and receiver rails. That combo is what lets you work without dinging up parts you care about.
Everything tucks into a molded green carrying case, so the punches stay sorted and you are not digging through a coffee can looking for the right size. It stores flat, travels well to the range, and keeps a small footprint on a crowded bench.
This is a solid starter kit for anyone building out a home armorer setup, and it earns its keep for experienced hands doing routine maintenance too. A quick tip from the shop: keep a little thread locker handy for the hammer face threads, and never force a punch that does not seat cleanly in the pin. Match the size, let the hammer do the work, and this set will handle your everyday pin jobs for years.
The set includes eight steel punches ranging from 1/16 up through 3/16, plus a 1/8 center punch and a brass punch for drifting sights. That range covers the pin diameters found on most modern pistols, rifles, and shotguns. For very small or specialty roll pins, you may eventually want to add a dedicated roll pin punch, but this kit handles the everyday jobs.
The hammer comes with a brass face and a plastic face that thread on and off. Brass gives you a firmer strike for driving pins while staying softer than steel, and the plastic face is meant for gentle taps on finished surfaces so you do not mar the metal. Being able to switch between them lets you match the strike to how delicate the part is.
Yes, it is a practical first kit for anyone doing their own maintenance and light pin work. The punches cover common sizes, the hammer protects your parts, and the case keeps things organized. A helpful tip is to add a drop of thread locker to the hammer face threads so they stay snug during use.
That is exactly what the brass punch is designed for. Brass is softer than the steel of a dovetail sight, so it moves the sight without scratching or denting the finish. Go slow, tap lightly, and check your progress often to keep everything centered.
| UPC | 076683897237 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 849723 |
| Color | Black, Green |
| Model | |
| Product Type | Kit |
| Shipping Weight | 2.3875 |
You must be logged in to post a review.
Reviews
There are no reviews yet.