Description
Getting a sling onto a break-action or over/under shotgun has always been the tricky part, since there's no forearm to screw a stud into like you'd find on a bolt gun. The Uncle Mike's QD 115 SG-4 set solves that with a magnum split barrel band that wraps around your barrel and tightens down, no gunsmithing or tearing the gun apart required. It's built for singles and over/unders, and this particular version fits 20 gauge barrels measuring between .700 and .750 inches, so a quick pass with a caliper before you order saves you the guesswork.
What the QD 115 SG-4 Brings to the Bench
The band base does the heavy lifting here, clamping onto the barrel without tools or disassembly. Once it's on, you get the classic Uncle Mike's quick-detach swivels in a 1" loop, which means your sling snaps on and off in seconds when you're loading into a truck or a case. The finish is blued to match traditional shotgun steel, and the whole set stays light enough that it won't throw off the feel of the gun.
Fitting the SG-4 Swivel Set the Right Way
Measuring your barrel is the make-or-break step. Owners have run these on everything from vintage Ithaca Model 37s to modern CZ over/unders, and the folks who measured first almost always report a clean fit. On an over/under, a light touch with a file on the open edge of the clamp helps it clear the rib between the barrels if you're running it snug. Take your time snugging the screws and you'll end up with a solid, rattle-free mount.
Keep in mind this set is made for 20 gauge in that specific diameter range, and it isn't the right pick for 28 gauge or .410. Uncle Mike's has been building swivels since the days they pioneered the modern design, and this band-mount setup is a proven way to sling up a shotgun that was never drilled for one.
Key Specifications
- Model: Quick Detach 115 SG-4
- Loop Size: 1 inch
- Fits: Some 20 gauge shotguns, .700 – .750" barrel diameter
- Gun Type: Single barrel and over/under shotguns
- Mount Style: Magnum split barrel band, tool-free
- Swivel Style: Quick Detach
- Finish: Blued
- Color: Black
- Manufacturer: Uncle Mike's
- Manufacturer Part Number: 15972
- UPC: 043699159727
What’s Included
- One magnum split barrel band base
- Two 1" quick-detach swivels
- 3/4" wood screw
Frequently Asked Questions
How do I know the QD 115 SG-4 will fit my shotgun?
This set is designed for 20 gauge barrels measuring between .700 and .750 inches in diameter. Grab a caliper and measure your barrel at the spot where the band will clamp before ordering. Owners who measure first tend to get a clean, secure fit right out of the package.
Do I need any tools or gunsmithing to install these swivels?
No, the magnum split barrel band mounts without tools or dismantling the gun, which is the whole point of this design. You wrap the band around the barrel and tighten it down. Most people have theirs installed in well under 20 minutes.
Will this magnum band swivel set work on an over/under shotgun?
Yes, it's made for both single-barrel and over/under shotguns in the correct diameter range. On some over/unders you may want to lightly file the open edge of the clamp so it clears the rib between the barrels. Test-fit it first, then snug everything down tight.
Can I use the QD 115 SG-4 on a 28 gauge or .410?
No, this set is built specifically for 20 gauge barrels in the .700 to .750 inch range. For a .410, Uncle Mike's offers the QD 115 CFL or QD 115 M357 instead, which are sized for those barrels.




Reviews
There are no reviews yet.