Description
Cleaning a barrel usually means elbow grease, a pile of patches, and more than a few passes with a brush. Shooters Choice Foaming Bore Cleaner takes a different route. You spray it into the breech end and the foam expands to fill the entire bore, coating every inch of the surface so the solvent can go to work on carbon, copper, and powder fouling while you set the gun down and walk away.
How the Foaming Bore Cleaner Actually Works
The idea here is simple. Instead of scrubbing your way through a dirty barrel, you let the foam and a little time carry the load. Lay the firearm on a flat surface or clamp it in a vise with the breech slightly higher than the muzzle, then spray until the bore is full. As the foam builds, it clings to the walls and reduces the chance of solvent seeping back into the action. Once it breaks down, you run a patch or two with your regular cleaning kit and you are done.
Where the Shooters Choice Foaming Cleaner Fits In
This is a great pickup for rifles, pistols, and shotguns that see regular range time or a long day in the field. The 3 oz aerosol can is small enough to toss in a range bag or truck box, and one can stretches across plenty of cleaning sessions. It pairs naturally with the rest of your kit rather than replacing it, so think of it as the soak step that makes everything after it easier.
Finishing the Job Right
Foam alone is not the whole story. After you wipe the bore clean, follow up with a quality lubricant and protectant to guard against rust and keep the action running smooth. Shooters Choice is made in the USA and has spent decades building gun care products that hold up in the real world, and this foaming cleaner carries that same reputation into an easy, no-fuss format that just about anyone can use.
Key Specifications
- Product Type: Foaming Bore Cleaner
- Size: 3 oz
- Format: Aerosol spray can
- Application: Spray into breech end
- Made In: USA
- Manufacturer: Shooters Choice
- Manufacturer Part Number: SHF-903-A-FC
- UPC: 027784000972
- Shipping Weight: 0.29 lb
What’s Included
- One 3 oz aerosol can of Shooters Choice Foaming Bore Cleaner
Frequently Asked Questions
How do you use Shooters Choice Foaming Bore Cleaner?
Make sure the firearm is unloaded, then lay it on a flat surface or clamp it in a vise with the breech slightly higher than the muzzle. Spray the foam into the breech end until the bore is full and let it sit until it breaks down. Once the foam has worked, remove it and wipe the bore clean with your usual cleaning kit, then follow up with a lubricant and protectant.
Does the foaming cleaner remove copper and carbon fouling?
Yes, the expanding foam is built to break down and lift the fouling that builds up from regular shooting, including carbon and powder residue. Because the foam fills the entire bore, it makes contact with the whole barrel surface rather than just where a patch reaches. For heavier buildup, you can let it soak longer or repeat the process.
What firearms can I use this bore cleaner on?
It works on rifles, pistols, and shotguns since the foam simply fills whatever bore you spray it into. The 3 oz can is handy for quick range-day cleanups as well as deeper sessions at the bench. Keep the breech slightly elevated so the foam stays in the barrel and out of the action.
Do I still need a cleaning kit with the foaming bore cleaner?
You do. The foam handles the soaking and loosening, but you still run patches or a brush to remove the broken-down residue afterward. Think of it as the step that makes the rest of your cleaning routine faster and easier.





Reviews
There are no reviews yet.