Description
A 20 gauge deserves the same care you'd give any gun in the safe, and the Otis 20 Gauge Shotgun Cleaning Kit gives you the right tools sized specifically for it. Otis built this around quality brass components that clean out fouling without chewing up your bore, so you can scrub with confidence whether you're wiping down a youth pump gun after a day of clays or clearing carbon out of a semi-auto that's seen a full box of dove loads.
What Comes in the Otis 20GA Kit
The heart of this kit is a set of five brass rod sections with male and female 8-32 threaded ends, plus a swivel handle rod that makes running things through the barrel a lot smoother. You get a 20ga bronze phosphor bore brush for knocking loose stubborn fouling, a 20ga cotton bore mop for final passes and spreading oil, and a nylon all-purpose brush for the exterior and those tight spots around the action. The pierce-point jag system with three felt pads is where Otis does things a little differently, letting you push patches through cleanly for a nice finish.
Why the FP-10 CLP Matters
Each kit ships with a half-ounce bottle of Shooter's Choice FP-10 Lubricant Elite CLP, and it earns its spot. This stuff cleans, lubricates, and protects in one step, cutting friction and wear while guarding against rust and corrosion. It's rated to hold up across a wide temperature swing, so it works just as well on a frosty morning duck hunt as it does at the range in July. It also lifts carbon, lead, and powder fouling, which is exactly what a shotgun bore collects.
Built and Machined in the USA
These are precision-machined parts made right here in the States, and it shows in the fit and finish. The 20 count of 2.5" x 2.5" patches and a shotgun 8-32 to 5/16-27 threaded end adaptor round out the package, so you're set for regular maintenance without hunting down extra pieces. For anyone who owns a 20 bore and wants to keep it shooting reliably season after season, this is a straightforward, dependable setup.
Key Specifications
- Manufacturer: Otis Technology
- MPN: FG-SRS-20
- UPC: 014895008027
- Product Type: Cleaning Kit
- Gauge: 20 Gauge
- Rod Sections: 5 brass sections, 8-32 threaded ends
- Bore Brush: 20ga bronze phosphor
- Bore Mop: 20ga cotton
- Jag: 20ga brass pierce-point with 3 felt pads
- Patches: 20 count, 2.5" x 2.5"
- Lubricant: 0.5 fl. oz. FP-10 Lubricant Elite CLP
- Country of Origin: Made in USA
- Shipping Weight: 0.37 lb
What’s Included
- 5 brass rod sections with male/female 8-32 threaded ends
- Swivel handle rod
- 20ga bronze phosphor bore brush
- 20ga cotton bore mop
- Nylon all-purpose cleaning brush
- 20ga brass pierce-point jag
- 3 felt pads
- 20 count 2.5" x 2.5" cleaning patches
- Shotgun 8-32 to 5/16-27 threaded end adaptor
- 0.5 fl. oz. bottle of FP-10 Lubricant Elite CLP
Frequently Asked Questions
Will the brass rods scratch my shotgun's bore?
No, that's the whole point of using brass. It's softer than the steel of your barrel, so it clears out fouling without leaving marks or scoring. The rod sections thread together and run through the bore smoothly with the swivel handle.
What is the FP-10 CLP in the Otis 20GA kit used for?
FP-10 Lubricant Elite CLP is an all-in-one product that cleans, lubricates, and protects. It cuts down friction and wear, guards against rust, and lifts carbon, lead, and powder fouling out of the metal. The half-ounce bottle is enough to handle several cleaning sessions on a 20 gauge.
Does this kit work for both pump and semi-auto 20 gauge shotguns?
Yes, the components are sized for the 20 gauge bore, so it works across pumps, semi-autos, and break-actions chambered in 20. The rod sections, brush, mop, and jag all fit the same bore diameter regardless of action type.
Is the Otis 20GA cleaning kit made in the USA?
It is. Otis Technology precision-machines these components in the United States, and the fit and finish reflect that. The FP-10 CLP included in the kit is also made in the USA.





Reviews
There are no reviews yet.