Description
If you shoot anything in the .22 or .223 family, this Otis kit gives you a dedicated setup that stays with those guns instead of digging through a pile of mismatched brushes. It's built around solid brass sectional rods and caliber-matched components, all sized for .22-.250, .223/5.56mm/5.56 NATO, 5.7mm, .22 Rimfire, and .22 LR. Everything tucks into a compact plastic box that's about 8.75 inches long, so it doesn't hog space on the bench or in your bag.
What Makes the Otis .22/.223 Kit Worth Keeping Around
The rod system is the heart of it. You get four brass rod sections with male/female 8-32 threaded ends plus a swivel handle rod, so you can build the length you need and let the handle turn with the rifling as you push through. Brass is the key detail here. It's tough enough to scrub out fouling but soft enough that it won't scratch or damage your barrel or crown, which is exactly what you want on a precision .223 bore or a beloved rimfire plinker.
Tools That Match the Job
Inside you'll find a .22 cal bronze phosphor bore brush for breaking loose carbon and copper, a .22 cal cotton bore mop for the final pass, and a .22 cal brass pierce point jag that keeps your patch centered and drops it clean once it clears the muzzle. There's a 100-count stack of 1×1 inch patches, a brass component adapter, and a double-sided nylon all-purpose brush for scrubbing around the action, bolt, and tight corners without marring the finish.
Lubrication Handled Too
Otis rounds it out with a half-ounce bottle of FP-10 Lubricant Elite CLP, so you can clean, lubricate, and protect in one step and get moving parts running smooth again. It's a genuinely complete little package, made in the USA and backed by Otis's no-nonsense warranty. Grab one for each caliber family you own and cleaning day gets a whole lot simpler.
Key Specifications
- Manufacturer: Otis Technology
- Manufacturer Part Number: FG-SRS-22
- UPC: 014895007969
- Product Type: Cleaning Kit
- Cleans Calibers: .22-.250, .223/5.56mm/5.56 NATO, 5.7mm, .22 Rimfire, .22 LR
- Rod Material: Solid Brass
- Rod Sections: 4 sections with 8-32 threaded ends
- Bore Brush: .22 cal bronze phosphor
- Bore Mop: .22 cal cotton
- Patches: 100 count, 1" x 1"
- Included Lubricant: FP-10 Lubricant Elite CLP, 0.5 fl. oz.
- Case Material: Plastic Box
- Length: 8.75 in
- Country of Origin: Made in the USA
What’s Included
- 4 brass rod sections with male/female 8-32 threaded ends and swivel handle rod
- .22 cal bronze phosphor bore brush
- .22 cal cotton bore mop
- .22 cal brass pierce point jag
- Brass component adapter
- 100-count 1" x 1" cleaning patches
- Double-sided nylon all-purpose brush
- 0.5 fl. oz. bottle of FP-10 Lubricant Elite CLP
- Plastic carrying case
Frequently Asked Questions
Will the Otis .22/.223 kit work on my AR-15 chambered in 5.56?
Yes. The kit is sized for .223/5.56mm/5.56 NATO right alongside .22 caliber, so it covers the standard AR-15 bore. You can thread together the four rod sections to reach full barrel length and run the bore brush, mop, and jag straight through.
Why brass rods instead of aluminum or steel?
Brass is softer than your barrel steel, so it won't scratch the bore, rifling, or crown the way harder or grit-collecting materials can. It's still plenty strong for scrubbing out fouling. That's why Otis builds these sectional rods and jags out of solid brass for traditional bench-style cleaning.
Does this Otis kit include cleaner and lubricant, or just the tools?
It comes with a 0.5 fl. oz. bottle of FP-10 Lubricant Elite CLP, which cleans, lubricates, and protects in one product. That covers routine maintenance out of the box, though heavy shooters may want a larger bottle of solvent and lube on hand for frequent range trips.
Can I use it on a .22 pistol too, not just rifles?
You can. The caliber-specific brush, mop, and jag fit .22 rimfire handguns as well as rifles, and you can use fewer rod sections for a shorter barrel. The swivel handle makes it easy to control the rod as it turns with the rifling.



Reviews
There are no reviews yet.