Description
Anyone who runs a 7.62/.308 AR knows the bolt carrier group collects carbon like nothing else. That baked-on gunk around the bolt tail, inside the carrier, and on the firing pin doesn't wipe away with a patch, and left alone it's the kind of thing that turns a smooth-running rifle into a finicky one. The Otis B.O.N.E. Tool exists to knock that fouling loose fast, without soaking parts for an hour or scrubbing until your hands cramp.
How the B.O.N.E. Tool Handles Carbon
The tool works with dedicated scraping surfaces contoured to the geometry of an AR bolt group. Drop the bolt into the larger U-shaped end with the internal grooves and twist to strip carbon off the body and the notorious bolt tail. The smaller end reams the inside of the carrier, and the center hole is sized to scrape down the firing pin once it's pulled. It's a disassemble-then-twist routine that takes a couple minutes and gets into the spots patches and brushes just skate over.
Built for 7.62 and .308 Platforms
This is the 7.62mm version, and it covers more than just one chambering. Otis lists it as compatible with .308, 7.62, 6.5 Creedmoor, and .243 Winchester bolt groups, so if you've got several rifles in that family, one tool handles the lot. Machining is tight and the tool is made in the USA, which is why it holds an edge through a lot of cleaning cycles.
A Few Practical Notes on the B.O.N.E. Tool
There's an 8-32 threaded hole built in so you can thread on a cleaning rod or handle and use it as a T-handle for more leverage on stubborn buildup. Bolts vary a little between manufacturers, so fitment can feel slightly snugger or looser depending on whose BCG you're running, but the scraping surfaces do their job across the board. Toss it in your range bag or cleaning kit and it's there whenever the carbon starts stacking up.
Key Specifications
- Manufacturer: Otis Technology
- Model: B.O.N.E. Tool
- Manufacturer Part Number: FG276
- UPC: 014895002629
- Product Type: Bolt Carrier Cleaning Tool
- Caliber Compatibility: .308 / 7.62 / 6.5 Creedmoor / .243 Winchester
- Cleans: Bolt, bolt carrier, and firing pin
- Threaded Hole: 8-32 (T-handle compatible)
- Platform: MSR/AR style rifles
- Country of Origin: USA
- Shipping Weight: 0.29 lbs
What’s Included
- Otis B.O.N.E. Tool (7.62mm)
- Otis Technology Lifetime Limited Warranty
Frequently Asked Questions
What calibers does the 7.62mm B.O.N.E. Tool work with?
The 7.62mm version is built for the .308 family of AR platforms. Otis lists it as compatible with .308, 7.62, 6.5 Creedmoor, and .243 Winchester bolt carrier groups. If you shoot the smaller AR-15 rounds, you'll want the 5.56 version instead, which covers .223/5.56, 300 Blackout, and .350 Legend.
How do you use the B.O.N.E. Tool to clean a bolt carrier group?
Field strip the BCG first. Insert the bolt into the larger grooved end and twist to scrape carbon off the body and bolt tail, use the smaller end to ream the inside of the carrier, and run the firing pin through the center hole to clean it down. Apply steady pressure as you twist and the caked-on fouling comes right off.
What is the 8-32 threaded hole on the B.O.N.E. Tool for?
That threaded hole lets you attach a cleaning rod or handle so the tool works as a T-handle. It gives you extra leverage and a better grip when you're working through heavier carbon buildup.
Will the B.O.N.E. Tool fit any brand of bolt?
It fits a wide range of 7.62/.308 bolts, though fitment can feel a touch tighter or looser depending on the manufacturer of your BCG, since dimensions vary slightly between makers. The scraping surfaces still do their job across the board. Most owners find it works cleanly on standard bolt groups.




Reviews
There are no reviews yet.