Description
Ranch rifles are supposed to be the do-everything truck gun, and the Gen II version of Ruger's American Ranch gets that formula right. At 37.35 inches overall and 6.2 pounds, this 5.56 NATO bolt gun rides behind the seat or across the ATV rack without complaint, and the 16.1 inch cold hammer-forged barrel keeps it lively when a coyote pops up at the fence line. Deep spiral fluting trims weight off the muzzle end for better balance, and the whole barreled action wears Cobalt Cerakote so dust, rain, and barn-wall storage won't chew up the finish.
What the Gen II Ranch Brings to the Table
The biggest quality-of-life upgrade is the Gen II stock. The FDE splatter finish gives your hands real texture without feeling like sandpaper, and a removable spacer lets you set length of pull anywhere from 12 to 13.75 inches, which is handy if the rifle gets shared between adults and younger shooters. There's an installed comb riser that lines your eye up nicely with a scope, and the soft rubber recoil pad makes an already mild-recoiling 5.56 downright pleasant. Feeding comes from a 10-round AR-style magazine, so spares are cheap and everywhere. The Marksman trigger is user-adjustable, and the three-position tang safety lets you cycle the bolt with the safety engaged.
Setting Up Your American Ranch Gen II
A Picatinny scope base comes installed from the factory, so mounting glass takes minutes. The muzzle is threaded 1/2"-28 with a radial-port brake already fitted, and that common thread pattern opens the door to other muzzle devices whenever you want to swap. The 1:8 twist stabilizes everything from light varmint loads up through heavier 69 and 77 grain match bullets, which makes this a genuinely flexible little rifle. For predator control, ranch chores, or an affordable bolt gun that feeds from mags you already own, this one is tough to argue with.
Key Specifications
- Manufacturer Part Number: 46919
- UPC: 736676469192
- Caliber: 5.56 NATO / .223 Rem
- Action: Bolt Action
- Capacity: 10+1
- Magazine Type: AR-Style Detachable
- Barrel Length: 16.10", Spiral Fluted, Cold Hammer-Forged
- Twist Rate: 1:8" RH
- Thread Pattern: 1/2"-28 with Radial Muzzle Brake
- Barrel/Receiver Finish: Cobalt Cerakote
- Stock: Flat Dark Earth Splatter Gen II Synthetic
- Length of Pull: 12" to 13.75" (Adjustable)
- Overall Length: 37.35"
- Weight: 6.2 lbs
- Safety: 3-Position Tang
- Sights: None, Picatinny Scope Base Installed
What’s Included
- Ruger American Gen II Ranch rifle
- One 10-round AR-style detachable magazine
- Installed radial-port muzzle brake
- Installed Picatinny scope base
- Length of pull spacer (installed)
- Owner's manual
Frequently Asked Questions
Does the Ruger American Gen II Ranch accept standard AR-15 magazines?
Yes, it feeds from AR-style magazines and ships with one 10-round mag in the box. That is one of the best features of the Ranch line since spare mags are inexpensive and easy to find. Most quality metal and polymer AR-pattern mags run well in it.
Can I shoot both .223 Remington and 5.56 NATO through this rifle?
Yes. The chamber is cut for 5.56 NATO, which safely handles both 5.56 and .223 Remington ammunition. The 1:8 twist rate stabilizes a wide range of bullet weights, from 55 grain plinking loads up to heavier 69 and 77 grain match bullets.
Does the Gen II Ranch come with sights or a scope?
No iron sights or scope are included, but a Picatinny scope base comes installed from the factory. Just add rings and your optic of choice and you are ready to zero. The installed comb riser on the stock helps get your eye lined up behind a scope, and it can be removed if you run a lower-mounted optic.
Can I remove the muzzle brake and attach a suppressor?
The factory radial-port brake threads onto a standard 1/2"-28 muzzle, so it comes off easily and swaps for a suppressor or another muzzle device using the same thread pattern. The 16.1 inch barrel keeps the overall package compact even with a can attached.




Reviews
There are no reviews yet.