Description
The micro-compact 9mm market is crowded, but the FN Reflex XL MRD earns its place at the top of that list in a way most of the competition simply doesn't. Most guns in this category make you choose between capacity, shootability, and concealability. FN built the Reflex XL to deliver all three. At just 1.08 inches wide and 20 ounces, it carries like a slim everyday gun while the flush-fit 15-round magazine gives you the same round count as a Glock 19. Throw in the included 18-rounder and you have serious firepower in a package that disappears under a t-shirt.
What Makes the FN Reflex XL Trigger Different
The internal hammer-fired, single-action-only design is the real story here. In a class almost entirely dominated by striker-fired pistols, FN went a different direction, and it pays off at the range. The trigger breaks cleanly right around five pounds with a short, tactile reset and none of the mushy stacking you feel in most micro-compacts. The slide also racks with noticeably lower force than comparable guns, which makes a real difference for anyone with smaller hands or reduced grip strength.
FN Reflex XL MRD: Built for the Way You Carry
The optics-ready slide is cut for Shield RMSc and Holosun 507K footprint micro red dots, so adding a dot is a straightforward swap with no gunsmithing. Out of the box it comes with a high-visibility tritium front night sight with an orange-painted ring paired with a blacked-out squared U-notch rear. The grip got a real ergonomic overhaul with a new palm swell, undercut trigger guard, extended beavertail, and two interchangeable backstraps so you can dial in the fit. The slimline accessory rail is patterned after the Glock 43X MOS rail, making it compatible with popular compact lights like the SureFire XSC and Streamlight TLR-7 Sub. Takedown is tool-free and does not require a trigger pull, which is a small but genuinely appreciated detail. The 3.8-inch cold hammer-forged stainless barrel features a recessed target crown and a PVD finish on the slide for solid corrosion resistance over the long haul.
Key Specifications
- Manufacturer: FN America
- MPN: 66-101759
- UPC: 845737019037
- Caliber: 9mm Luger
- Action: Semi-Auto, Internal Hammer-Fired, Single-Action-Only
- Barrel Length: 3.8"
- Barrel Material: Cold Hammer-Forged Stainless Steel
- Barrel Finish: PVD Black
- Overall Length: 6.75"
- Height: 5.2"
- Width: 1.08"
- Weight: 20 oz.
- Capacity: 15+1 / 18+1
- Sights: Tritium Front Night Sight (Orange Ring) / Black U-Notch Rear
- Optic Footprint: Shield RMSc / Holosun 507K
- Trigger Pull: 4.5 – 5.5 lbs.
- Frame: Polymer
- Safety: No Manual Safety (Firing Pin Block, Trigger Safety, Internal Hammer Block)
- Magazine Release: Reversible
What’s Included
- FN Reflex XL MRD pistol
- 1x 15-round magazine
- 1x 18-round magazine
- 2x interchangeable backstraps
- Optic cover plate
Frequently Asked Questions
What red dot optics are compatible with the FN Reflex XL MRD slide cut?
The slide is cut for any micro red dot sharing the Shield RMSc or Holosun 507K footprint. That covers a solid range of popular compact optics including the Holosun 507K, Shield RMSc, and others using the same pattern. A cover plate is included if you run it without a dot.
Does the FN Reflex XL MRD have a manual safety?
No, this model ships in a non-manual safety configuration. It does have multiple internal passive safeties built in, including a firing pin block, a trigger safety, and an internal hammer block. FN designed the trigger system itself to be the primary safeguard against unintended discharge.
How does the FN Reflex XL compare to the standard FN Reflex?
The XL is about a half inch longer and just under an inch taller than the original Reflex, but those dimensions buy you a lot. The grip extension accommodates a flush-fit 15-round magazine compared to the original's 10-round flush fit, and the 3.8-inch barrel adds a bit of velocity over the standard model's 3.3-inch tube. The XL also adds ergonomic upgrades including the palm swell, extended beavertail, and interchangeable backstraps.
What weapon lights work with the FN Reflex XL MRD accessory rail?
The slimline rail is patterned after the Glock 43X MOS rail, so it works with lights built for that platform. The SureFire XSC and Streamlight TLR-7 Sub are both confirmed compatible. It is not a standard Picatinny rail, so not every light will mount up.
Is the FN Reflex XL MRD good for concealed carry if I have smaller hands?
It was clearly designed with carry in mind. The two interchangeable backstraps let you fit the grip to your hand size, and the slide racks with notably lower force than most guns in this class. The 1.08-inch width keeps it from printing, and at 20 ounces it carries comfortably all day.
Does disassembly require pulling the trigger on the FN Reflex XL MRD?
No, and that is one of the better quality-of-life details on this pistol. You just lock the slide back and flip the takedown lever, no trigger pull required. It is a small thing, but it is a legitimate safety advantage over several competing designs.





Reviews
There are no reviews yet.