Description
There is no firearm on the civilian market quite like the KRISS Vector. The SDP (Special Duty Pistol) Gen II is the non-NFA semi-auto pistol version of the same platform used by military and law enforcement units around the world, and it brings that same engineering to the range without any paperwork hassle. The futuristic profile is not just for looks — every angle of this thing exists because of the Super V system underneath. The bolt carrier group rides down and away from the bore on every shot, counteracting the natural tendency of any firearm to flip upward. The result is a shooting experience that genuinely feels different from anything else. Rapid follow-up shots stay flat and on target in a way that blowback-operated pistol carbines simply cannot match.
What Makes the KRISS Vector SDP G2 Run So Flat
The Super V Recoil Mitigation System works by pairing that downward-tracking bolt with an extremely low bore axis — the barrel sits below the fire control group, roughly in line with the second knuckle of the shooting hand. Those two factors working together give you mechanical leverage over recoil forces rather than fighting against them. Add 9mm ballistics to the mix and you have one of the softest-shooting, fastest-cycling pistol-format firearms available. The Gen II brought meaningful improvements over the original: a redesigned pivoting trigger with an audible and tactile reset, a shorter-throw ambidextrous safety lever, and tool-free four-pin disassembly that makes field stripping and caliber conversion quick and straightforward.
KRISS Vector SDP G2 as a Suppressor Host
The 5.5-inch 4140 chrome-moly steel barrel is finished in a hard black nitride QPQ treatment for corrosion resistance and wears 1/2×28 threads — the standard pitch for 9mm suppressors. The full-length MIL-STD 1913 Picatinny top rail gives you room to run a red dot or full-size optic, and the lower rail handles a light or laser without issue. Flip-up front and rear sights come installed and fold down flat when a scope or red dot is mounted. A rear QD sling mount is built in for easy transport. The polymer composite frame is reinforced with steel components throughout, and the magwell is cut to accept full-size Glock G17 magazines — including the 33-round Glock extended mags or the KRISS MagEx2 kit that takes capacity to 40 rounds, which is where the 40+1 spec on this listing comes from. This thing is seriously fun to shoot suppressed, and the low-recoil platform makes that experience genuinely easy to manage.
Key Specifications
- Manufacturer: KRISS USA
- Model: Vector SDP Gen II
- MPN: KV90PBL20
- UPC: 810237023006
- Caliber: 9mm Luger
- Action: Semi-Auto, Closed Bolt Delayed-Blowback
- Barrel Length: 5.5 inches
- Barrel Material: 4140 Chrome-Moly Steel
- Barrel Finish: Black Nitride (QPQ)
- Thread Pattern: 1/2"-28 TPI
- Overall Length: 16.75 inches
- Weight (Unloaded): 6 lbs.
- Magazine Compatibility: Glock G17 Pattern (17 rd, 33 rd, MagEx2 40 rd)
- Capacity: 17+1 (40+1 with MagEx2 extension)
- Sights: Adjustable Flip-Up Front and Rear
- Safety: Ambidextrous Short-Throw Lever
- Frame Material: Advanced Polymer Composite with Steel Components
- Top Rail: Full-Length MIL-STD 1913 Picatinny
- Bottom Rail: MIL-STD 1913 Picatinny
- Country of Origin: USA (Chesapeake, Virginia)
What’s Included
- KRISS Vector SDP Gen II Pistol
- 1x Glock G17 17-round magazine
- Hard case
- Owner's manual
- Gun lock
Frequently Asked Questions
Does the KRISS Vector SDP Gen II require any NFA paperwork?
No. The Vector SDP is classified as a pistol and is a non-NFA firearm, so no tax stamp or special registration is required to purchase it. It ships as a standard pistol transfer through your local FFL dealer.
What magazines does the KRISS Vector SDP 9mm use?
It uses standard Glock G17-pattern 9mm magazines. The included magazine is a 17-rounder, and it will also accept the Glock 33-round extended magazine. KRISS also makes the MagEx2 kit that converts a G17 mag to 40-round capacity, which is where the 40+1 spec originates.
Is the KRISS Vector SDP G2 a good suppressor host?
It is genuinely one of the better 9mm suppressor platforms out there. The 5.5-inch barrel is threaded at 1/2×28, which is the standard pitch for nearly all 9mm suppressors on the market. The low-recoil Super V system also means the gun stays exceptionally flat even with the added weight of a can up front.
What ammo does KRISS recommend for the Vector 9mm?
KRISS recommends ammunition loaded to at least SAAMI pressure specifications. The robust, combat-rifle-style action cycles best with standard-pressure or hotter loads — light target loads or underpowered handloads may not cycle reliably. The platform has been tested extensively with 9mm +P and handles it without issue.
Can I add a pistol brace or optic to the KRISS Vector SDP Gen II?
Yes on both counts. The full-length Picatinny top rail will accept any Picatinny-compatible red dot, holographic sight, or magnified optic. The rear of the upper receiver features a threaded socket compatible with AR-15 buffer tubes, making it straightforward to mount a pistol brace using a compatible adapter.
How does the Gen II differ from the original KRISS Vector?
The Gen II introduced a redesigned pivoting trigger with a cleaner, more tactile reset, an ambidextrous safety with a shorter throw angle, a tool-free four-pin takedown for faster disassembly, and the ability to swap caliber lower receivers without tools. The grip was also reshaped for better ergonomics compared to the Gen I design.




Reviews
There are no reviews yet.