Description
The 1911 crowd has been asking for years for a compact 9mm that doesn't give up the crisp single-action trigger that makes the platform worth carrying in the first place. The Ruger SR1911 Officer-Style answers that with a 3.6 inch barrel, a low-glare stainless slide riding on an anodized aluminum frame in Tungsten gray Cerakote, and a carry weight of 27.2 ounces. That two-tone look isn't just for show either. The lightweight frame is what makes this thing pleasant on the hip all day, and the softer recoil of 9mm through a metal-framed 1911 makes range sessions easy on the hands.
What Sets This SR1911 Officer Apart
Ruger stuck with the classic Series 70 design and used CNC-controlled machining to get a tight slide-to-frame fit with smooth travel. The barrel is a bushingless coned setup with an integral feed ramp, paired with a flat wire recoil spring that holds up well in short-barreled 1911s. You also get a skeletonized trigger with an adjustable overtravel stop, a skeletonized hammer for quicker lock time, a titanium firing pin, an oversized ejection port, and an extended magazine release. The drift-adjustable Novak 3-dot sights sit in dovetails, so upgrading down the road is simple if you ever want something different.
Built for the Belt, Not the Safe
The controls are where this pistol earns its keep as a carry gun. The oversized beavertail grip safety and extended thumb safety give you positive, repeatable manipulation, and the deluxe checkered G10 grip panels with a checkered backstrap lock your hand in place without chewing up your side. At 7.25 inches overall and 5 inches tall, it hides well under a shirt while still giving you enough grip to get a full firing hold.
Ruger SR1911 Officer 9mm in the Box
This model, part number 06758, ships with two 7-round magazines, so you're ready for the range or a carry rotation right out of the gate. It's a well-executed compact 1911 from a company that builds them right here in the USA, and it's a solid pick whether this is your first 1911 or your fifth.
Key Specifications
- Manufacturer Part Number: 06758
- UPC: 736676067589
- Model: SR1911 Lightweight Officer-Style
- Caliber: 9mm Luger
- Action: Single Action Only, Semi-Auto
- Capacity: 7+1
- Barrel Length: 3.6"
- Overall Length: 7.25"
- Height: 5"
- Width: 1.34"
- Weight: 27.2 oz
- Slide: Low-Glare Stainless Steel, Rear Serrations
- Frame: Anodized Aluminum, Tungsten Gray Cerakote
- Grips: Deluxe Checkered G10
- Sights: Drift Adjustable Novak 3-Dot
- Twist Rate: 1:10" RH, 6 Grooves
What’s Included
- Ruger SR1911 Officer-Style 9mm pistol
- Two 7-round magazines
- Owner's manual
- Cable lock
- Factory hard case
Frequently Asked Questions
How many rounds does the Ruger SR1911 Officer 9mm hold?
Ruger lists this model at 7+1 capacity, and it ships with two 7-round magazines. Extended aftermarket magazines for officer-size 9mm 1911s can bump that up a bit if you want extra rounds on a reload.
Is the SR1911 Officer a good carry gun?
That's exactly what it was built for. The aluminum frame keeps it at 27.2 ounces, which is noticeably lighter than a steel-framed 1911, and the 7.25 inch overall length with a 3.6 inch barrel conceals well. The extended thumb safety and beavertail grip safety give you the traditional 1911 carry manual of arms.
Does the SR1911 Officer use a barrel bushing like a standard 1911?
No, this model uses a bushingless coned barrel with an integral feed ramp, which is common on short-barreled 1911s and helps with lockup and feeding. It also runs a flat wire recoil spring, which tends to last longer than conventional springs in compact 1911s. Takedown is a little different from a full-size Government model, but the manual walks you through it.
Can I swap the sights or grips on this Ruger 1911?
Yes on both counts. The Novak 3-dot sights are mounted in dovetails and the rear is drift adjustable, so plenty of aftermarket options will fit. The G10 grip panels are standard replaceable 1911 grips, so swapping to a different texture or color is a five minute job.




Reviews
There are no reviews yet.