Description
Tikka took the wonderfully smooth T1x rimfire action and dropped it into the same modular aluminum chassis as the T3x Ace Target, and the result is one of the most capable factory precision rimfires you can put your hands on. This 16 inch .17 HMR version pairs a cold hammer forged heavy barrel with a flat-shooting little cartridge that turns steel plates and prairie dogs into easy work well past typical rimfire distances. The muzzle comes threaded 1/2×28 from the factory, so adding a suppressor or muzzle device takes about a minute.
Why the T1x Ace Target Makes Sense as a Trainer
Here is the real draw. Because the chassis is shared with the T3x Ace Target, everything about your setup carries over between practice and match day. Your length of pull, cheek height, grip angle, and body position all stay consistent, which means cheap rimfire trigger time translates directly into better centerfire shooting. The skeletonized aluminum stock adjusts for length of pull, cheek weld, and recoil pad position, the pistol grip swaps for any AR-compatible grip, and the rear of the stock accepts additional weights when you want the rifle to settle in even harder on the bags.
A .17 HMR Chassis Rifle Ready for Glass and Gear
The receiver wears a 20 MOA Picatinny rail out of the box, so mounting a scope with plenty of elevation for stretching the HMR is simple. The forend brings ARCA-Swiss RRS compatibility for tripods and quick-adjust bipods, plus M-LOK slots for whatever else you run. A 45 degree bolt lift keeps cycling quick and clears low-mounted optics, and the free-floated barrel keeps things consistent shot after shot.
What You Get with This T1x Ace Target Setup
This configuration ships with one detachable 10-round magazine and a black Cerakote finish that holds up to real range use. Whether you are shooting NRL22-style matches, working on positional skills, or just want a serious varmint rig that does not beat you up, this one earns its spot in the safe.
Key Specifications
- Manufacturer: Tikka
- Model: T1x Ace Target
- Manufacturer Part Number: JRT1XATB30916
- UPC: 082442020273
- Caliber: .17 HMR
- Action: Bolt Action
- Barrel Length: 16 in, heavy profile
- Barrel Type: Cold hammer forged, free-floated, threaded
- Muzzle Thread: 1/2×28
- Twist Rate: 1:9
- Capacity: 10+1
- Stock: Adjustable skeletonized aluminum chassis
- Optics Mounting: 20 MOA Picatinny rail installed
- Forend Interface: ARCA-Swiss RRS and M-LOK
- Sights: None
- Finish: Black Cerakote
What’s Included
- Tikka T1x Ace Target rifle
- One 10-round detachable magazine
- 20 MOA Picatinny rail (factory installed)
- Owner's manual
Frequently Asked Questions
Is the Tikka T1x Ace Target suppressor ready?
Yes. The 16 inch heavy barrel comes threaded 1/2×28 from the factory, which is the standard rimfire thread pitch, so most rimfire suppressors and muzzle devices spin right on. The shorter barrel also keeps overall length manageable once a can is attached.
How adjustable is the chassis on the T1x Ace Target?
Quite a bit. The skeletonized aluminum stock adjusts for length of pull, cheek riser height, and recoil pad position, and the pistol grip is adjustable for angle or replaceable with any AR-compatible grip. The rear of the stock also accepts add-on weights if you want more stability on bags or a tripod.
Does the T1x Ace Target come with a scope or sights?
No sights or optic are included, but Tikka installs a 20 MOA Picatinny rail at the factory, so mounting a scope is quick and easy. The built-in 20 MOA of cant gives you extra elevation travel, which is handy for stretching the .17 HMR out to longer distances.
How is this different from a standard Tikka T1x?
The Ace Target uses the same smooth T1x action but swaps the synthetic sporter stock for the modular aluminum chassis shared with the T3x Ace Target. That gives you full ergonomic adjustability, ARCA and M-LOK attachment points, and a consistent feel between your rimfire trainer and a centerfire match rifle.




Reviews
There are no reviews yet.