Description
For years, builders have asked Bergara to sell their Premier actions and barrels as standalone components, and this is the answer. This barreled action pairs the USA-made Premier action with a 22-inch No.6 contour CURE carbon fiber barrel chambered in 7mm PRC, the same combination you'll find on rifles like the MG Lite. At just 4.2 pounds, it's a serious head start on a lightweight mountain rifle without the wait or cost of a full custom barrel job.
What Makes the CURE Barrel Different
Plenty of carbon fiber barrels look great and then wander as they heat up. Bergara tackled that with Cold Bore Technology, weaving continuous stainless steel strands directly into the carbon wrap to pull heat away from the chamber and bore. The result is a barrel that stays stiff, straight, and consistent from the first cold shot through a full string. The 1:8 twist stabilizes the long, high-BC 7mm bullets that make the 7 PRC such a capable long-range hunting cartridge, and the muzzle comes threaded 5/8×24 with a thread protector so you can run a suppressor or brake right out of the gate.
A Premier Action Built for Custom Work
The action itself is machined from 416 stainless steel and features a spiral-fluted bolt body, enlarged bolt handle, dual ejectors, and a sliding plate extractor for positive, reliable case handling. It's built on the Remington 700 footprint, so it fits most Rem 700 pattern stocks and chassis, accepts Rem 700 style triggers, and takes Rem 700 pattern scope bases with 8-40 screws. That opens up a massive aftermarket of components to finish the build your way.
Bergara Premier 7 PRC: The Smart Foundation
Drop this into a lightweight carbon stock for a backcountry rig or bed it into a chassis for steel work at distance. Either way, you're starting with proven Bergara barrel quality and an action that runs smooth from day one.
Key Specifications
- Manufacturer: Bergara
- Manufacturer Part Number: BPBA34-7PRC
- UPC: 043125700059
- Model: Premier Series Barreled Action
- Caliber: 7mm PRC
- Action Type: Bolt Action, Remington 700 footprint
- Barrel Length: 22"
- Barrel Type: CURE Carbon Fiber with Cold Bore Technology
- Barrel Contour: No. 6
- Twist Rate: 1:8
- Muzzle Threading: 5/8×24
- Scope Base Pattern: Remington 700 style, 8-40 screws
- Finish: Raw Stainless / Carbon Fiber
- Weight: 4.2 lbs
- Action Material: 416 Stainless Steel
- Made In: USA
What’s Included
- Bergara Premier barreled action, 7mm PRC
- Thread protector
Frequently Asked Questions
Will the Bergara Premier Barreled Action fit my Remington 700 stock or chassis?
Yes, the Premier action is built on the Remington 700 footprint and fits most Rem 700 pattern stocks and chassis. It also accepts Rem 700 style triggers and uses Rem 700 pattern scope bases with 8-40 screws. As with any drop-in, a quality bedding job or a well-machined chassis will get the most out of it.
Does this barreled action come with a trigger or bottom metal?
No, this is the barreled action only, with a thread protector on the muzzle. You'll need to add your own Rem 700 compatible trigger, stock or chassis, and bottom metal or magazine setup to complete the rifle. That's the appeal here, since you get to pick every component to match your build.
What is Cold Bore Technology on the CURE carbon fiber barrel?
Bergara weaves continuous stainless steel strands into the carbon fiber wrap to conduct heat away from the chamber and bore. This addresses the point-of-impact shift some carbon barrels show as they warm up, keeping the barrel consistent from a cold first shot through longer strings. It's the same barrel used on Bergara's MG Lite and Divide rifles.
Is the 1:8 twist good for heavy 7mm bullets?
It is. The 1:8 twist stabilizes the long, high-BC bullets the 7mm PRC was designed around, including popular 175 to 180 grain hunting and match loads. That makes this barreled action well suited for long-range hunting and precision work alike.




Reviews
There are no reviews yet.