0
0

Bergara Premier Series Barreled Action .300 PRC 26in Stainless

UPC: 043125173013

$1,249.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

For years folks have asked Bergara to sell their Premier action on its own, and this barreled action is the answer. You get the same USA-built receiver and Spanish-made barrel quality found on rifles like the HMR Pro, minus the stock, so you can build the .300 PRC rig you want instead of settling for a factory configuration. The action wears a spiral-fluted bolt body, an enlarged bolt handle, a dual ejector, and a sliding plate extractor, and it drops into most Remington 700 pattern stocks and chassis without drama.

A 26 Inch Barrel That Lets the .300 PRC Stretch Its Legs

The .300 PRC was designed from the start around long, high BC .30 caliber bullets, and it rewards barrel length. The 26-inch 416 stainless barrel here gives the cartridge room to build velocity, and the 1:9 twist stabilizes the heavy match and hunting bullets this round was made for, think 212 to 230 grain projectiles. The #5.5 contour is the same profile Bergara runs on the HMR Pro, stout enough to hold point of impact through longer strings but not so heavy that a hunting build becomes a boat anchor. The muzzle comes threaded 5/8×24 with a thread protector installed, so adding a brake or suppressor is about as simple as it gets. On a magnum like this, most builders will want one or the other.

Built on the Remington 700 Footprint for Easy Custom Builds

Because it follows the Rem 700 pattern, the aftermarket is wide open. The receiver is drilled and tapped for 8-40 screws with 700-style scope base compatibility, and it accepts 700-pattern triggers and bottom metal, so pairing it with a chassis, a TriggerTech or Timney, and the glass of your choice is a straightforward afternoon project rather than a months-long gunsmithing job. The raw stainless finish looks sharp as-is or can be Cerakoted to match the rest of the build. If you have been eyeing a long-range hunting rifle or an ELR-capable range gun in .300 PRC, this is a strong place to start.

Key Specifications

  • Manufacturer: Bergara
  • Model: Premier Series Barreled Action
  • Manufacturer Part Number: BPBA17-300PRC
  • UPC: 043125173013
  • Caliber: .300 PRC
  • Action Type: Bolt Action, Remington 700 footprint
  • Barrel Length: 26 in
  • Barrel Material: 416 Stainless Steel
  • Barrel Contour: No. 5.5
  • Twist Rate: 1:9
  • Muzzle Thread: 5/8×24 with thread protector
  • Scope Base Pattern: Rem 700 style, 8-40 screws
  • Bolt Features: Spiral-fluted body, enlarged handle, dual ejector, sliding plate extractor
  • Finish: Raw Stainless (Silver)

What’s Included

  • Bergara Premier Series barreled action in .300 PRC
  • Thread protector (installed on 5/8×24 muzzle)

Frequently Asked Questions

Will the Bergara Premier barreled action fit Remington 700 stocks and chassis?

Yes, it is built on the Remington 700 footprint and is designed to fit most 700-pattern stocks and chassis on the market. That also means 700-compatible triggers, bottom metal, and scope bases will work. Just note the receiver uses the 8-40 screw pattern for bases, not the older 6-48 size.

Does this barreled action come with a trigger or stock?

No, this is the barreled action only, which is the whole point for custom builders. You will need to add a Rem 700 pattern trigger, a stock or chassis, and bottom metal or a magazine system to complete the rifle. That gives you full control over how the finished gun handles and shoots.

What bullet weights does the 1:9 twist handle in .300 PRC?

The 1:9 twist is well suited to the heavy, high BC bullets the .300 PRC was built around, including popular 212, 220, and 225 grain loads. That makes it a great match for long-range hunting and extended-distance target work. Lighter .30 caliber bullets will shoot fine too, but the heavies are where this cartridge shines.

Is the muzzle ready for a suppressor or brake?

Yes, the barrel comes threaded 5/8×24, which is the standard thread pitch for most .30 caliber muzzle brakes and suppressor mounts. A thread protector is included to keep the threads clean if you run it bare. Given the recoil of a .300 PRC, most builders end up adding a brake or can.

Additional information

UPC

043125173013

Manufacturer

Manufacturer Part Number

BPBA17-300PRC

Action

ATF Type

RECEIVER

Barrel Length

26"

Caliber/Gauge

.300 PRC

Color

Silver

Length

26"

Model

Package Height

4.0

Package Width

9.75

Product Type

Accessory-Actions

Shipping Weight

8.35

Reviews

There are no reviews yet.

Be the first to review “Bergara Premier Series Barreled Action .300 PRC 26in Stainless”