Description
The Magpul MBUS Gen 2 Rear Sight has earned its spot as one of the most trusted backup irons out there, and for good reason. Molded from impact-resistant polymer, it stays light on your rifle and shrugs off the kind of bumps and knocks that would bend or crack cheaper metal sights. It clamps right onto any MIL-STD-1913 Picatinny or STANAG 4694 receiver rail and gives you the same height-over-bore as standard A2 irons, so it drops into your setup without any fuss.
What Makes the MBUS Rear Sight Worth Running
The spring-loaded flip mechanism is the heart of this thing. Fold it flat and it tucks down to about a half-inch profile, keeping your rail clean and out of the way of your optic. When you need it, a little pressure on either side tab or a press on top pops it right up and locks it into place ready to go. The detent and spring pressure hold it erect under normal use, but it can still fold out of the way if it takes a hard knock instead of snapping off.
Dual Apertures and Simple Windage on the MBUS Gen 2
You get two same-plane flip apertures, a larger one for quick close-range work and a smaller one for tighter precision at distance. Both are protected by wings that shield them from damage, and the sight will still fold with either aperture in position. Windage is handled by a knurled detent knob that adjusts in positive clicks, so dialing in your zero is straightforward and repeatable without any tools.
Why the MBUS Pairs So Well With a Red Dot
Because it sits at standard A2 height, this sight co-witnesses cleanly with most red dots and holographic optics. Fold it down and it disappears behind your glass, then flip it up in a hurry if your battery dies or your optic goes down. It's a set-it-and-forget-it insurance policy that weighs almost nothing. Made in the USA, this is one of those upgrades that just makes sense on a working AR-15.
Key Specifications
- Manufacturer: Magpul Industries
- Model: MBUS Gen 2
- Manufacturer Part Number: MAG248-BLK
- UPC: 873750004358
- Color: Black
- Product Type: Rear Sight
- Style: Flip-Up / Folding
- Material: Impact-Resistant Polymer
- Aperture Configuration: Dual Aperture (same plane)
- Adjustment: Windage, detent knob
- Adjustment Click Value: 0.5 MOA
- Mounting: MIL-STD-1913 Picatinny / STANAG 4694
- Weight: 1.3 oz with hardware
- Height Above Rail (Stowed): ~0.51 in
- Length (Stowed / Deployed): 2.6 in / 1.5 in
- Made In: USA
What’s Included
- Magpul MBUS Gen 2 Rear Sight (Black)
- Mounting hardware
Frequently Asked Questions
Does the MBUS Gen 2 rear sight co-witness with a red dot?
Yes. It sits at the same height-over-bore as standard A2 irons, which lets it co-witness cleanly with most red dot and holographic optics. Fold it down behind your glass when you don't need it, then flip it up if your optic goes down.
Will the MBUS rear sight fit my rifle?
It clamps to any MIL-STD-1913 Picatinny or STANAG 4694 receiver rail and is tailored to the AR-15/M16/M4 platform. If your upper has a standard Picatinny rail on top, it will bolt right on. Just note it's meant for receiver rails, not railed gas blocks that run hot.
How do you adjust the MBUS Gen 2 for windage?
There's a knurled detent knob on the sight that adjusts windage in positive, repeatable clicks at 0.5 MOA per click. You can dial your zero by hand without any special tools. Elevation is handled by your front sight, as is standard on an AR.
Is a polymer backup sight durable enough to trust?
Magpul's impact-resistant polymer is built to take abuse and flex back to shape rather than bending or breaking like metal can. The detent and spring design also lets the sight fold out of the way under a hard impact instead of snapping. For everyday range use and as a genuine backup, it holds up well and keeps weight down.





Reviews
There are no reviews yet.