Description
The Pow'RBall is built around a design that solves real-world problems people face with .38 Super pistols. The 100-grain bullet features a gilding metal jacket filled with a V-shaped lead core cavity and capped with a round polymer ball that's crimped firmly in place. What makes this round stand out is how that polymer cap actually works during firing.
When the bullet travels downrange, the polymer ball helps disperse air around it for better aerodynamics. In your pistol's feed ramp and chamber, the rounded ball profile feeds like standard hardball ammunition, which means you don't have to worry about the feeding problems that plague many hollow point designs. That alone makes it worth considering if your .38 Super is picky about ammunition.
How the Pow'RBall Expands on Impact
Once the bullet hits a target, the polymer ball does something clever. It delays initial expansion as the round pushes through several inches of penetration before the ball gets pushed aside. This reveals the hollow point cavity underneath and allows the bullet to expand properly and retain most of its weight. The design also keeps the hollow point cavity clean from fabric and other debris that would normally plug it up and prevent expansion.
Ballistics and Performance
This loading pushes the 100-grain bullet to 1525 fps with 516 foot-pounds of energy measured from a 5-inch test barrel. The +P designation means this runs at higher pressures than standard .38 Super loads, so make sure your firearm is rated for it. The lighter bullet weight and controlled expansion together reduce felt recoil, which gives you faster follow-up shots when accuracy matters most.
Key Specifications
- Caliber: .38 Super +P
- Bullet Weight: 100 grains
- Bullet Type: Polymer Tip Hollow Point
- Muzzle Velocity: 1525 fps (5-inch barrel)
- Muzzle Energy: 516 foot-pounds
- Case Type: Brass
- Primer: Boxer
- Reloadable: Yes
- Corrosive: No
- Rounds per Box: 20
- Manufacturer: Cor-Bon
- Model: Pow'RBall
- MPN: PB38X100
- UPC: 757750355460
What’s Included
- 20 rounds of Cor-Bon Pow'RBall .38 Super +P ammunition
Frequently Asked Questions
Will Pow'RBall ammo feed better than standard hollow points in my .38 Super?
Yes. The rounded polymer ball profile mimics hardball ammunition, which is why it feeds so smoothly in semi-automatic pistols. Many people experience feeding issues with conventional jacketed hollow points in certain .38 Super pistols, but the Pow'RBall design essentially eliminates that problem while still delivering defensive performance.
What is the +P designation and do I need a special gun?
The +P means this ammunition runs at higher pressure than standard .38 Super loads. Your firearm must be specifically rated for .38 Super +P ammunition to safely use these rounds. Check your manual or contact the manufacturer if you're unsure about your gun's rating.
How does the polymer ball help with expansion?
The polymer ball delays expansion during the first few inches of penetration, then gets pushed aside as the bullet moves deeper into tissue. This allows the hollow point cavity to expand properly after the bullet has already penetrated. The ball also keeps the cavity clean from clothing and debris that would normally cause a hollow point to fail.
Can I reload Pow'RBall brass cases?
Yes, the cases are standard boxer-primed brass and are fully reloadable. The ammunition is new production and non-corrosive, so the cases will perform just like standard .38 Super brass once you've fired them.



Reviews
There are no reviews yet.