Description
The XS Sights R3D is a three-dot tritium night sight set built around one idea: keep your eye locked on the front sight. It fits a wide range of Glock small-frame and full-size pistols, including the 17, 19, 22-24, 26, 27, 31-36, and 38 across generations 1 through 5. The green tritium front dot sits inside a photoluminescent Ember Glow Dot that soaks up ambient light and keeps glowing when the sun goes down, so you get a high-contrast reference in daylight and a bright index point at night.
What Makes the R3D Front Sight Stand Out
XS built the front sight to outshine the rear on purpose. The front tritium vial runs brighter and gives the Ember ring a slight charge, which means your front dot always pops a little harder than the two green rear lamps. That difference does a lot of work in the real world by naturally pulling your focus downrange where it belongs instead of splitting your attention across three equal dots. The 0.145 inch front blade and a wider 0.170 inch rear notch leave clean daylight on both sides of the post, so indexing is quick without giving up alignment.
Steel Build and Fitment on Your Glock
These are CNC machined from solid steel bar stock at the XS shop in Fort Worth, Texas, then blued for corrosion resistance with regular cleaning and oil. Steel holds up to drops, slide racks off a belt or barricade, and years of carry in a way polymer sights just won't. The blacked-out rear has a clean ledge that helps with one-handed slide manipulations against a hard surface, and the low-profile shape is made to clear standard holsters without snagging.
Installation is straightforward whether you run a sight pusher or a punch and hammer. The set includes the tools and hardware to get it done at the bench, and XS backs the tritium with a long-term warranty. For an everyday carry or home-defense Glock, this is a proven upgrade over factory plastic sights that gets you a real front-sight-focus system in bright light and dark.
Key Specifications
- Manufacturer: XS Sights
- Model: R3D
- Manufacturer Part Number: GL-R012P-6G
- UPC: 647533046459
- Sight Type: 3-Dot Tritium Notch and Post
- Front Sight: Green Tritium with Green Ember Glow Dot
- Rear Sight: Green Tritium, Blacked-Out
- Front Blade Width: 0.145 in
- Front Blade Length: 0.500 in
- Rear Notch Width: 0.170 in
- Material: CNC Machined Steel, Blued Finish
- Fits: Glock 17, 19, 22-24, 26, 27, 31-36, 38 (Gen 1-5)
- Made In: Fort Worth, Texas, USA
What’s Included
- Front sight
- Rear sight
- Front sight installation tool
- Red threadlocker
- Instruction insert
Frequently Asked Questions
Which Glock models do these R3D sights fit?
This set fits Glock small-frame and full-size models including the 17, 19, 22-24, 26, 27, 31-36, and 38 across generations 1 through 5. It does not fit the single-stack slim frames like the 42, 43, 43X, or 48, which use a different sight set. If your Glock is one of the listed models, you're good to go.
Why is the front sight brighter than the rear on the R3D?
XS designed the front to glow harder on purpose using a brighter tritium vial that also charges the photoluminescent Ember ring. That intentional difference keeps your eye pulled to the front dot rather than splitting focus across three equal dots. The result is faster front-sight focus and cleaner alignment when speed matters.
Can I install the R3D sights myself?
Yes. The set is made for a straightforward install using either a sight pusher tool or a punch and hammer, and it ships with a front sight tool and red threadlocker to lock things in. If you're not comfortable at the bench, most gunsmiths can knock it out in a few minutes.
Do the tritium dots need batteries or charging?
No batteries here. The tritium lamps are self-illuminating and glow on their own around the clock, so they're ready in total darkness without any charging. The green Ember front ring adds extra glow by absorbing ambient light, giving you a bright reference in low light on top of the tritium.






Reviews
There are no reviews yet.