Redding 7mm Carbide Size Button Kit – .284 Caliber #49283

$39.99

Swap in this carbide size button and get smoother inside-neck sizing on your 7mm cases without any lube. The button floats freely on the decap rod so it self-centers in the neck for consistent, cleaner results every time.

4 in stock

SKU: CROW|67499 Category: Tag: Brand:

Description

If you reload 7mm cases and you're tired of dealing with lube buildup inside your case necks, this Redding carbide size button kit is one of those small upgrades that makes a noticeable difference at the press. It drops into your existing Redding die and replaces the standard steel sizing button with a hard, polished carbide version that glides through the neck. The result is sizing that feels smoother on the downstroke and leaves your necks cleaner, so you're not scrubbing lube off after every batch.

What the 7mm Carbide Button Does Differently

The carbide button is free floating on the decap rod, which lets it self-center as it passes through the case neck. That self-centering action helps keep neck tension consistent and runout down, which is exactly what you want if you're chasing accuracy with your 7mm loads. Because carbide is so slick, you can skip inside-neck lubrication entirely and still get an easy, uniform pull back through the neck.

Fitting the Kit to Your 7mm Dies

This kit is sized for .284 caliber bottleneck cartridges, so it covers the whole 7mm family including 7mm-08, .280 Remington, 7mm Rem Mag, and 7mm PRC. It installs in standard full-length and neck sizing dies, and it also fits Redding Type-S bushing dies. Swapping it in is a straightforward job that takes just a few minutes with basic tools.

Built to Last Over Thousands of Rounds

Reloaders who've made the switch tend to call it a real improvement over the factory steel button, and the carbide surface holds up well over long sessions and high round counts. If you load 7mm in any kind of volume, this is the kind of part you install once and forget about while it quietly makes every sizing stroke a little nicer.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 49283
  • UPC: 611760492839
  • Caliber: .284 Caliber / 7mm
  • Button Material: Carbide
  • Design: Free-floating, self-centering on decap rod
  • Lubrication Needed: No inside-neck lube required
  • Compatibility: Standard sizing dies and Type-S bushing dies
  • Cartridge Type: Bottleneck
  • Country of Origin: United States
  • Shipping Weight: 0.05 lb

What’s Included

  • Carbide size button (7mm/.284 caliber)
  • Retainer
  • Spare decapping pin

Frequently Asked Questions

Do I need to lubricate my case necks when using the 7mm carbide size button?

No, that's the main reason to run one. The carbide surface is slick enough to pull cleanly through the case neck without inside-neck lube, which keeps your necks cleaner and cuts down on post-sizing cleanup.

Will this carbide size button kit fit my existing Redding 7mm dies?

Yes. It's made to upgrade standard Redding full-length and neck sizing dies in 7mm, and it also fits Redding Type-S bushing dies. Installation just involves swapping the standard button for the carbide one on the decap rod.

What cartridges does the .284 caliber button cover?

This button is sized for the full 7mm family of bottleneck cartridges, so it works with the likes of 7mm-08, .280 Remington, 7mm Rem Mag, and 7mm PRC. Any .284 caliber case run through your Redding die is a match.

How does the free-floating design help with accuracy?

Because the carbide button floats on the decap rod, it self-centers as it passes back through the neck instead of being held rigidly off-axis. That helps keep neck tension even and minimizes runout, which can tighten up your groups.

Additional information

UPC

611760492839

Manufacturer

Manufacturer Part Number

49283

Caliber/Gauge

.284 Caliber

Shipping Weight

0.05

Reviews

There are no reviews yet.

Be the first to review “Redding 7mm Carbide Size Button Kit – .284 Caliber #49283”