RCBS 8x57mm Mauser Neck Die Set – 2-Die Neck Sizing Kit

$54.99

Squeeze more accuracy and longer life out of your 8mm Mauser brass with this RCBS two-die neck sizing set. Built for bolt-action reloaders running dedicated brass, it sizes the neck only so your fire-formed cases keep their custom chamber fit.

1 in stock

SKU: CROW|204939 Category: Tag: Brand:

Description

The RCBS 8x57mm Mauser Neck Die Set is a two-die setup made for the bolt-action reloader who wants to wring the best out of their brass. Rather than reworking the whole case the way a full-length die does, the neck sizer touches the neck alone and leaves the shoulder and body sitting right where your chamber fire-formed them. That means less working of the metal, which translates to brass that lasts longer and ammo that tends to shoot tighter out of the rifle it was fired in.

How the RCBS 8mm Mauser Neck Die Set Works

The set includes two dies. The Neck Sizer Die carries an expander-decapping unit, so as it resizes the case neck it also knocks out the spent primer in a single stroke. The Seater Die uses an adjustable bullet seater plug to set your seating depth where you want it, and it has a built-in roll crimper if you choose to crimp. Both dies run the industry-standard 7/8-14 thread, so they drop into just about any single-stage or progressive press from RCBS, Hornady, and most other makers.

Who the 8x57mm Mauser Neck Sizing Set Is Built For

Neck sizing is a bolt-action game. Because the case keeps its fire-formed body dimensions, each round is matched to the specific chamber it came out of, so this is the route for folks running a dedicated batch of brass through one rifle. Keep in mind that brand-new brass should be full-length sized and fired once before neck sizing makes sense, since the case needs to be fire-formed first. If you plan to feed multiple 8mm Mauser rifles from the same brass pile or you're loading for a semi-auto, a full-length set is the better call.

Quality You Can Count On

RCBS machines these dies from their proprietary die steel and hand-inspects them before they leave the factory in Oroville, California. The interiors are finished smooth to make sizing easy and to keep from scratching your valuable brass. The decapping pins are replaceable, so a broken pin doesn't sideline the die. It ships in the familiar green RCBS die box.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 15902
  • UPC: 076683159021
  • Caliber: 8x57mm Mauser
  • Die Type: Neck Sizing 2-Die Set
  • Die Group: Group A
  • Thread: 7/8-14 (standard)
  • Material: Proprietary die steel
  • Intended Use: Bolt-action rifles, dedicated brass
  • Decapping Pin: Replaceable
  • Country of Origin: Made in USA

What’s Included

  • Neck Sizer Die with Expander-Decapping Unit
  • Seater Die with Bullet Seater Plug and built-in roll crimper
  • Green RCBS die box

Frequently Asked Questions

What's the difference between this neck die set and a full-length die set for 8×57 Mauser?

The neck die resizes only the case neck and leaves the shoulder and body at their fire-formed dimensions, while a full-length die resizes the entire case back to SAAMI minimum specs. Neck sizing works the brass less, which extends case life and keeps a tight chamber fit for better accuracy. The tradeoff is that neck-sized brass is matched to the chamber it was fired in, so it isn't the pick for multiple rifles or semi-autos.

Can I use this set with brand-new 8mm Mauser brass?

New brass should be full-length sized and fired once first so it fire-forms to your chamber. After that initial firing, the neck die handles your reloads going forward. Neck sizing only makes sense once the case body has taken on your rifle's chamber dimensions.

Does the RCBS 8x57mm Mauser neck die set fit my press?

Yes, both dies use the standard 7/8-14 thread, which fits nearly all single-stage and progressive presses from RCBS, Hornady, and most other brands. You will need the correct 8×57 shell holder for your press, as that is sold separately.

Is this neck die set a good choice for a semi-automatic 8mm Mauser?

No. Neck sizing is intended for bolt-action rifles because the case keeps a tight, fire-formed fit. Semi-autos need full-length sized brass for reliable feeding, so go with a full-length die set for any autoloader.

Additional information

UPC

076683159021

Manufacturer

Manufacturer Part Number

15902

Reviews

There are no reviews yet.

Be the first to review “RCBS 8x57mm Mauser Neck Die Set – 2-Die Neck Sizing Kit”